Avoid working over carpet because of the risk of getting glass shards on the floor if the glass breaks. You ll need a large flat surface preferably one that is slightly soft and won t scratch your glass.

How To Cut A Mirror Without A Glass Cutter 13 Steps

Have lots of empty wine bottles and don t know what to do with them.

How can you cut glass. With the glass submerged take a firm stick and hit the glass below the point where you want to cut. You dont need much but be sure to have it on along the whole line. Learn how to cut glass with a string and fire to make amazing drinking glasses.

The patterns in pressed glass are rounded and smooth to touch. Anyone can do this. Any grime or silica on the glass can ruin your score.

The second method is to use a glass cutter and hold it on an object you want the height of the bottle to be cut at. This video shows how to cut glass and mirrors with a manual hand held glass cutter. Press your cutter into the glass carefully not pressurizing too much.

Run the cutter from the beginning of the marked line through the entire length of the line. Using wire to cut glass without a glass cutter is also easy. Work in an area that is easy to clean.

Doing it in the water achieves two things. After about 5 minutes dip the bottle in cold water. For example to cut a 10 inch wide piece of glass measure 9 7 8 inches and then make a mark.

Step 1 set up your work area. Try your best to make it done in one try. This is extremely simple when using the proper tools.

The glass cutter is held in place and the bottle is spun around giving it a level score line. For their own safety keep pets and children away from your workspace and materials step 2 clean the glass surface in the area where you plan to make cuts. For longer cuts the best would be to put some straight on the glass the whole way where you want to score the glass.

If you want to cut a glass bottle with a flame use a glass cutter or a glass drill bit to score a line around the bottle. Hold the bottle over a small candle or butane torch so the line you made is directly over the flame. The blow will be softer and the water will lessen the vibrations.

Score the glass surface with your glass cutter. Run your fingers along the designs on the glass. Use a framing square steel rule or other straightedge to serve as a guide for the glass cutter.

Have some oil of choice in a cup and use a little brush to tip in the oil and brush onto the glass. The glass should break along the line of the string when you hit it. The score line on the bottle is then held over a flame while the bottle is rotated.

When you are cutting the glass keep the straight edge of the cutter in place. Constantly rotate the bottle so you get even coverage. If the edges feel sharp the piece is probably cut glass.